Jacking Instructions
Raising the Machine
Greensmaster 3120
17230SL Rev C
Failing to properly support the machine with appropriate jack stands
can cause the machine to move or fall and can result in personal
injury.
When changing the attachments, tires, or performing other services,
do the following steps:
• Park the machine on a solid level surface, such as a concrete
floor.
• Always block the wheels with chocks.
• Before you lift the machine, remove all the attachments that may
interfere with the safe and correct lift of the machine.
• Use correct blocks, hoists, and jacks to raise the machine.
• Use appropriate jack stands to support the raised machine.
• Do Not use a cutting unit as a jacking point.
g212063
1.
Left front jacking point (frame channel under the step behind the left front wheel)
2.
Rear jacking point (rear wheel caster fork)
CAUTION
Figure 2
Page 1–7
Safety: Jacking Instructions