Toro Greensmaster 3120 Service Manual page 123

Filtering the Closed-Loop Traction Circuit (continued)
Greensmaster 3120
17230SL Rev C
g217377
1. Right side wheel motor
B. If the right wheel motor was replaced, remove the wheel and thoroughly
clean the junction at both ends of the upper hydraulic tube and remove
the tube; refer toFigure
g217376
1. Left side wheel motor
C. If the left wheel motor was replaced, remove the wheel and thoroughly
clean the junction at the end of the hydraulic hose and the lower fitting;
refer to Figure
5. Connect the hydraulic filter in series between the disconnected fitting hose.
Use a Hydraulic Hose Kit (page 4–28)
fittings and hose connections are properly tightened.
Figure 50
2.
50.
Figure 51
2.
51.
if necessary and make sure that
Page 4–77
Hydraulic tube
Hydraulic hose
Hydraulic System: Service and Repairs