Toro Greensmaster 3120 Service Manual page 40

Installing the Fuel Tank
Engine: Service and Repairs
After fuel tank is installed, make sure that clearance between fuel
tank and hydraulic tank is from 3.2 to 9.5 mm (0.125 to 0.375 inches).
1. Secure the fuel tank to the vehicle frame:
A. Apply anti-seize lubricant to the threads of the four (4) cap screws.
B. Install the cap screws through the fuel hose clamps, the flat washers and
the bushings. Make sure the bushings are between the flat washers
and the frame.
C. Tighten the cap screws from 3.4 to 6.7 N∙m (30 to 60 in-lb).
2. Connect the fuel hose to the fuel shut-off valve and secure with the hose
clamp.
3. Connect the vent hose to the top of the fuel tank and secure with the hose
clamp. Make sure that the hose is not kinked or obstructed.
4. Open the fuel shut-off valve and fill the fuel tank with fuel.
5. Check the fuel system for leaks and repair as necessary before returning
the machine to service.
IMPORTANT
Page 3–6 Greensmaster 3120
17230SL Rev C