GSSI StructureScan Mini XT Quick Start Manual page 21

StructureScan Mini XT Quick Start Guide
Collecting a Grid
1
Position the Mini XT on the first line in the "X" direction on
the scan template. Take care that the side lasers are lined up on
the thick, black start line and that the front laser is aligned with
the line you are scanning.
2
Using the handle keypad, click the arrow in the direction of
Scan. The Mini XT will switch to the collection screen and
you will see an overview of the grid template. Pull the handle
trigger to start the Mini XT recording. Wait for the Mini XT
to beep before moving.
3
Roll the Mini XT in a straight line to the end of the scan pad to
just beyond the edge of the printed grid. The Mini XT will beep
twice and stop recording when it receives enough data.
4
Pick up the Mini XT and position it at the beginning of the next line. Pull the handle trigger to start the Mini XT
recording. Wait for the Mini XT to beep before moving.
5
When you are finished with the final "X" direction line, move on to the "Y" direction and continue the process until
you have collected all of the lines.
6
Select Close Grid from the Menu Carousel when finished.
Page 17
Lasers properly aligned