First Time Setup - GSSI StructureScan Mini XT Quick Start Manual

StructureScan Mini XT Quick Start Guide

First Time Setup

Note: The Mini XT incorporates a touch screen. You can use the handle keypad or touchscreen to access most of the
menu items.
1
Set Language: Make sure that the Mini XT is in ScanMax App. Click the Down arrow to highlight the Menu
Carousel and then the Left/Right arrows to choose Select Language. Click the middle keypad button or press the
softkey on the carousel to select. Choose your desired language. This may cause the Mini XT to restart.
2
Set Units: In the ScanMax App, choose Units from the Menu Carousel. Click the middle handle keypad button to
press the softkey to toggle between English (Imperial) and Metric units.
3
Calibrate Antenna: In the ScanMax App, select Calibrate Antenna from the Menu Carousel. Follow the onscreen
instructions. Calibrating will set appropriate gain levels.
4
Set Date/Time: In the ScanMax App, choose the secondary menu softkey: Click the middle handle
button or push the softkey to toggle to the ScanMax secondary menu carousel.
Follow the onscreen instructions to set the appropriate date and time.
The choices you have made here will carry over to the ScanEZ and the
Scan3D Collection Apps.
Page 6
Secondary Menu Softkey