Operational Checks - MTU 8V4000M*3 series Operating Instructions Manual

Table of Contents

Advertisement

5.6 Operational checks

DANGER
Components are moving or rotating.
Risk of crushing, danger of parts of the body being caught or pulled in!
• Operate the engine at low load only. Keep clear of the danger zone of the engine.
WARNING
High level of engine noise when the engine is running.
Risk of damage to hearing!
• Wear ear protectors.
Operational checks
Item
Engine under load
Engine at nominal speed
Air filter
HP fuel pump
HT coolant pump
Fuel prefilter (optional)
Raw water pump (only on
engines with engine-mount-
ed or optional remote heat
exchanger)
Bilge pump (optional)
84 | Operation | MS15034/00E 2018-08
Task
Check engine visually for leaks and general condition; Check air pipework be-
tween air filter and exhaust turbocharger for leaks and damage.
Check for abnormal running noise, vibration, and exhaust color (→ Page 100).
Check signal ring position of service indicator (→ Page 187).
Replace air filter (→ Page 185), if the signal ring is completely visible in the
service indicator control window.
Check relief bores for fuel discharge (→ Page 157).
Check relief bore for oil and coolant discharge and obstructions
(→ Page 210).
Check reading on differential pressure gage (→ Page 170);
Drain water and contaminants (→ Page 171).
Check relief bore for oil and coolant discharge and obstructions
(→ Page 218).
Check relief bore for oil and coolant discharge and obstructions
(→ Page 221).

Advertisement

Table of Contents
loading

This manual is also suitable for:

8v4000m638v4000m53r8v4000m53

Table of Contents