Transport, Storage, Unpacking - Siemens Simovert Masterdrives Operating Instructions Manual

08.2009
3

Transport, Storage, Unpacking

Transport
Storage
CAUTION
Unpacking
Siemens Controls
Siemens AG 6SE7087-6JD50
SIMOVERT MASTERDRIVES
The units and components are packed in the manufacturing plant
corresponding to that specified when ordered. A packing label is
located on the outside of the packaging. Please observe the
instructions on the packaging for transport, storage and professional
handling.
Vibrations and jolts must be avoided during transport. If the unit is
damaged, you must inform your shipping company immediately.
The units and components must be stored in clean, dry rooms.
Temperatures between -25 °C (-13 °F) and +70 °C (158 °F) are
permissible. Temperature fluctuations must not be more than 30 K per
hour.
If the storage period of one year is exceeded, the unit must be newly
formed. See Section "Forming".
The packing consists of a wooden floor, cardboard and corrugated
cardboard. It can be disposed of in accordance with the local
regulations.
The units and components can be installed and commissioned after
they have been unpacked and checked to ensure that everything is
complete and that they are not damaged. Depending on their degree of
protection and type of construction, the units are mounted on a pallet
either with or without transport rails.
Operating Instructions
Transport, Storage, Unpacking
3-1