Siemens Simovert Masterdrives Operating Instructions Manual page 179

08.2009
Mounting
G-type rail according to EN50035
350 mm
Side view
G-type rail according to EN50035
350 mm
Side view
Siemens Controls
Siemens AG 6SE7087-6JD50
SIMOVERT MASTERDRIVES
The unit is mounted directly to a mounting surface, for which you
require the following:
♦ G-type mounting rail according to EN50035 with screws for fixing at
the top
♦ One M6 screw for types A to C, two M6 screws for type D, for fixing
at the bottom
♦ Dimension drawing for types A, B and for types C, D.
Mounting surface
Type A
Front view (without front panel)
Fig. 5-2 Dimension drawings for installation of types A, B
Mounting surface
Type C
Front view (without front panel)
Fig. 5-3 Dimension drawings for installation of types C, D
Operating Instructions
Cutouts for
M6 screws
45 mm
90 mm
Type B
Cutouts for
M6 screws
90 mm 45 mm
180 mm 180 mm
270 mm
Type D
Installation
67.5 mm
135 mm
5-3