Table of Contents
Advertisement
Loewe bild
User handbook
Initial installation
Setting options for the satellite system (other communal
installation):
Select
single satellite
Select satellite.
OK Confirm selection.
Proceed to next step.
LNB
frequencies,
Supply
voltage
Select and adapt settings.
OK Confirm selection.
LNC
Normally, you do not need to change the values for
frequency
high and low band, unless the LNC (LNB) of your
satellite system uses a different oscillator frequency
(important for the frequency display).
Supply
If your set is connected to a single-cable system
voltage
without external voltage supply, you can connect
the antenna supply (13V or 18V / max. 500mA).
Proceed to next step.
Proceed to section Setting options for all types of
reception.
30
Advertisement
Table of Contents
