Loewe bild series User Handbook Manual page 24

Loewe bild
User handbook
Initial installation
Setting options for DVB-T reception:
If you have not selected Terrestrial (DVB-T) in step Connect
antenna cable(s) in the initial installation, proceed to the next section
Setting options for DVB-C reception.
Network
selection
If several networks are available via DVB-T, you can
decide which network you want to receive your
channels from.
Select network,
OK Confirm selection.
Proceed to next step.
Settings
Select and adapt settings for DVB-T reception.
OK Confirm selection.
Scrambled You can state whether coded channels are to be
channels searched for in the search/update.
Select yes to save all found scrambled channels.
However, these channels can only be received in
connection with a CA module and the appropriate
Smart Card.
The handling of the CA module is described in the
chapter System settings, section Extras – CA
module.
Accept In various countries, digital channels (DVB-T) are
Logical transmitted with a preset channel number per chan-
Channel nel, known as Logical Channel Numbers (LCN).
Number
If you select yes here, these default channel slots
will be used and the channels of the preferred signal
source will be sorted as per LCN. The channels in
the channel list can no longer be shifted.
24
Supply Select supply voltage no (0V) / yes (5V).
voltage
If you use a DVB-T antenna that requires a supply
DVB-T
voltage (active antenna) and which is not already
antenna
supplied via a power adaptor, then select yes (5V)
for the antenna's power supply.
How to align your DVB-T antenna is described in
chapter System settings, section Connections
– Antenna DVB.
Proceed to next step.