Loewe bild series User Handbook Manual page 23

Loewe bild
User handbook
Initial installation
Setting options for reception via SAT>IP:
If you have not selected SAT>IP in step Connect antenna cable(s)
in the initial installation, proceed to the next section Setting options
for IPTV reception.
Server
selection
Select server,
OK Select / deselect the server.
State from which servers you wish to receive your
channels.
Before each selected server, the symbol
appears.
The server converts the antenna television signals
from the reception system into IP signals and
provides them in an existing local IP network.
Proceed to next step.
Setting options for reception via IPTV:
If you have not selected IPTV in step Connect antenna cable(s) in
the initial installation, proceed to the next section Setting options
for DVB-T reception.
Network
selection
(IPTV)
If more than one receive network is available via IPTV,
you can select the network from which you want to
receive your channels.
Select network,
OK Confirm selection.
Proceed to next step.
23