6.4
Audio Settings
Configures the audio output, volume, and alert types.
Audio Output
To use the audio output of the transponder, select XPDR. If installing a GTX 345 in a GX000 system, select HSDB.
Volume
To raise the volume of the transponder audio, push 8. To lower the volume, push 9. The range is 0 to 100.
Voice
Set the voice type to MALE or FEMALE.
Test Audio
The test audio files are used to set the volume level of the transponder. Selections are:
• NONE
• MSG 3
190-01499-02
Rev. 9
AUDIO OUTPUT
ALTITUDE ALRT
TIMER EXPIRED ALRT
TRAFFIC ALERT
Figure 6-1 Audio Group
• TONE
• MSG 1
Figure 6-2 Audio Page
Post Installation Configuration & Checkout
AUD
VOLUME
VOICE
• MSG 2
GTX 3X5 Transponder TSO Installation Manual
Page 6-3