Audio Settings; Figure 6-1 Audio Group - Garmin GTX 3X5 Installation Manual

6.4

Audio Settings

Sets the audio output, volume, and alert types.
AUDIO OUTPUT
To use the audio output of the transponder, select XPDR. If installing a GTX 345 in a GX000 system,
select HSDB.
VOLUME
To raise the volume of the transponder audio, push the 8 key. To lower the volume, push the 9 key. The
range is 0 to 100.
VOICE
Set the voice type to MALE or FEMALE.
TEST AUDIO
The test audio files are used to set the volume level of the transponder. Selections are:
• NONE
• MSG 3
190-01499-02
Rev. 4
AUDIO OUTPUT
TEST AUDIO
ALTITUDE ALRT
TEST AUDIO
TIMER EXPIRED ALT
TRAFFIC ALERT

Figure 6-1 Audio Group

• TONE
AUD
VOLUME
VOICE
• MSG 1
GTX 3X5 Transponder TSO Installation Manual
• MSG 2
Page 6-3