Display Functions And Settings; Transponder (Xpdr); Figure 3-1 Flight Id Edit Display Page; Figure 3-2 Flight Id Editable Display Page - Garmin GTX 3X5 Series Pilot's Manual

3 DISPLAY FUNCTIONS AND SETTINGS

The GTX 3X5 is organized into four menu groups shown on the right-hand side of the
display. Each menu group contains a set of functions and settings. Menu groups
include:
• Transponder (XPDR) • Timers (TMR) • Altitude (ALT) • System (SYS)
• To navigate between the menu groups, press the
• To navigate up or down and between the functions and settings within a current
menu group, press the 8or 9keys.
When enabled by installation configuration, the menu group last selected, and the
functions last used within that menu group, are saved and restored at system power on.
Otherwise, function navigation resets to the default state at system power on.
3.1

Transponder (XPDR)

FLIGHT ID
the Flight ID is not editable. If configured, the Flight ID Edit prompt
displays, as shown in figure 3-1. Use the ENT and CLR keys to edit the
Flight ID. An example of the editable Flight ID page is shown in
figure 3-2.
190-01499-00 Rev. A
Press
FUNC
Press key
FUNC
key
Press
Press
FUNC
FUNC
key
key
– This page displays the active Flight ID. Unless configured,

Figure 3-1 Flight ID Edit Display Page

Figure 3-2 Flight ID Editable Display Page

Garmin GTX 335/345 Pilot's Guide
3 – DISPLAY FUNCTIONS/SETTINGS
key.
FUNC
3-1