1.14.1 Non-TSO Functions
The following are declared non-TSO functions, these non-TSO functions as defined in this manual have been evaluated
with the TSO functions. The design data for these non-TSO functions has been accepted by the FAA when these non-
TSO functions are installed in accordance with the guidance and limitations provided in this manual.
The GTX 3X5 includes the following non-TSO functions.
• TIS-A (GTX 335)
• Wireless data conversion (Bluetooth interface) (GTX 345)
1.14.2 Design Assurance Levels
Mode S transponder functionality
Display of TIS-A traffic data
Flight information data (FIS-B, including weather information) processing and output to
display
Display of outside air temperature (static)
Flight timers
1090 ADS-B transmission
1090/UAT ADS-B reception
Correlation of TCAS traffic with ADS-B, ADS-R, and TIS-B traffic
Conflict Situational Awareness (CSA) including visual and aural alerts
External UAT ADS-B control
Internal GPS/SBAS
Pressure sensor module
Altitude monitor/alerting
Flight ID
Bluetooth output
HSDB packet forwarding
Data concentrator
Main board, transponder, and I/O
ADS-B board, 978 MHz and 1090 MHz receivers
GPS receiver
[1] Developed to DO-178B level B equivalent process.
190-01499-02
Rev. 9
Table 1-16 Software Design Assurance Levels
System Function
Table 1-17 Complex Hardware Design Assurance Levels
Function
GTX 3X5 Transponder TSO Installation Manual
System Overview
DO-178B
Level
C
C
D
C
C
C
B
B
B
C
B
C
C
C
E
B
C
DO-254
C
C
B [1]
Page 1-15