Certification; Table 1-13 Tso Compliance - Garmin GTX 3X5 Series Installation Manual

1.14 Certification

The GTX 3X5 meets compliance with the TSO(s) when interfaced with equipment and installed in accordance with the
requirements and limitations as outlined in this manual.
FIS-B information, including weather information, NOTAMs, and TFR areas, are intended to assist in long- and near-
term planning decision making. The system lacks sufficient resolution and updating capability necessary for aerial
maneuvering associated with immediate decisions.
The Appliance Project Identifier (API) for the GTX 3X5 is GMN-01216. The API is used for project identification with the
FAA. To identify appliance approvals refer to applicable hardware and software part numbers.
GTX GTX
335 345
X [2] X [2] TSO-C88b
X X TSO-C112e
X [1] X [1] TSO-C145d
X TSO-C154c
X TSO-C157a
X
TSO-C166b
X
X TSO-C195a
[1] With internal GPS.
[2] With optional GAE module.
[3] For software v2.05 or earlier, the units are Level 2 els.
190-01499-02
Rev. 9

Table 1-13 TSO Compliance

Class and
TSO
Level
--
Class 1
Level 2ens
[3]
Class B2
Class A1S
Class 1
Class B1S
Class A1S
Class C1,
C2, C3, C5
Function
Automatic Pressure Altitude Reporting Code-
Generating Equipment
Air Traffic Control Radar Beacon System / Mode Select
(ATCRBS/Mode S) Airborne Equipment
Airborne Navigation Sensors Using the Global
Positioning System Augmented by the Satellite Based
Augmentation System
Universal Access Transceiver (UAT) Automatic
Dependent Surveillance – Broadcast (ADS-B) Equipment
Operating on Frequency of 978 MHz
Aircraft Flight Information Services – Broadcast (FIS-B)
Data Link System and Equipment
Extended Squitter Automatic Dependent Surveillance –
Broadcast (ADS-B) and Traffic Information Service –
Broadcast (TIS-B) Equipment Operating on the Radio
Frequency of 1090 Megahertz (MHz)
Avionics Supporting Automatic Dependent Surveillance
– Broadcast (ADS-B) Aircraft Surveillance Applications
(ASA)
GTX 3X5 Transponder TSO Installation Manual
System Overview
Page 1-13