C.2
GPS Sources
Manufacturer
Model
G950/G1000
Internal
GTN 6XX/7XX
Garmin
GNS 400W/
500W
GNS 480
GTX 3X5
GDL 84/88 with
GPS/SBAS
[1] Installations with no TIS.
[2] Installations with TIS (GTX 335 only).
[3] Installations with GDU software v15.00 or later.
[4] Installations with GDU software prior to v15.00.
190-01499-02
Rev. 9
Table C-2 GPS Source
Data
Interface
Format
Configuration
GTX 33ES #1 [1]
RS-232
OR
GTX 33ES #1 w/ TIS [2]
N/A
N/A
RS-232
ADS-B OUT +
HSDB
ADS-B In Source: GTX
ADSB TFC
RS-232
ADSB TFC WX
ADS-B OUT +
GTX + [1]
RS-232
GTX w/TIS+ [2]
ADS-B OUT +
ADS-B + FMT 1
RS-232
ADS-B + FMT 2
ARINC
743A
429
Equipment Compatibility and Configuration
GTX 3X5
Configuration
REMOTE FMT 1 [1,3]
OR
The primary purpose of this interface is transponder
REMOTE FMT 2 [2,3]
control, however this format also includes GPS data.
LGCY REMOTE 1 [1,4]
Refer to table C-9.
OR
LGCY REMOTE 2 [2,4]
Refer to section 6.8.
ADS-B + FMT 1
GTN - Enabled
Applicable to GTX 345 installations only.
Applicable to GTX 345 only (software version 2.10 and
earlier), or GTX 335/345 (software version 2.11 and
GNS
later). Note that the primary purpose of this interface is
for ADS-B In Data, however this format also includes
GPS data. Refer to table C-1.
ADS-B + FMT 1
Supports GPS data only.
REMOTE FMT 1 [1]
Note that the primary purpose of this interface is
transponder control, however this format also includes
REMOTE FMT 2 [2]
GPS data. Refer to table C-9.
ADS-B + FMT 1
N/A
ADS-B + FMT 2
ARINC 743A
GTX 3X5 Transponder TSO Installation Manual
Notes
Page C-3