Garmin GTX 3X5 Series Installation Manual page 157

NOTES
CONFIG MODULE REQUIRES WIRE HARNESS P/N: 325-00122-00. PRESSURE SENSOR/CONFIG MODULE
REQUIRES WIRE HARNESS P/N: 325-00421-00. MODULE WIRE HARNESSES ARE NOT INTERCHANGEABLE.
1
WIRE COLOR IN MODULE WIRE HARNESS DESIGNATES FUNCTION. CONNECT MODULE WIRE HARNESS
TO GTX 3X5 ACCORDING TO WIRE COLOR.
FOR DETAILS REFER TO SECTION 5.3.1.
2
GPS KEEP ALIVE IS RECOMMENDED FOR GPS INSTALLS. IF NOT CONNECTED GPS MAY TAKE UP TO
3
5 MINUTES TO OBTAIN A GPS FIX.
FOR LIGHTING BUS CONNECTIONS REFER TO SECTION 5.4.
4
GPS KEEP ALIVE MUST BE CONNECTED TO THE UNSWITCHABLE BATTERY BUS (BUS DIRECTLY
5
CONNECTED TO THE BATTERY).
Figure D-1 GTX 3X5 Power Configuration Typical Interconnect
190-01499-02
Rev. 9
Sheet 2 of 2
GTX 3X5 Transponder TSO Installation Manual
Interconnect Drawings
Page D-4