lancer Spartan Ice Installation & Operation Manual

lancer Spartan Ice Installation & Operation Manual

Advertisement

Please refer to the Lancer Corp website (lancercorp.com) for information relating to Lancer Installation/Operation
Manuals, Installation Guides, Instruction Sheets, and Technical Bulletins or for your convenience, scan this QR code
with a mobile device (app required) for immediate access to other Technical Documents and alternative translations
pertaining to this unit.
ABOUT THIS MANUAL
This booklet is an integral and essential part of the product and
should be handed over to the operator after the installation and
preserved for any further consultation that may be necessary.
Please read carefully the guidelines and warnings contained
herein as they are intended to provide the user with essential
information for the continued safe use and maintenance of the
product. In addition, it provides GUIDANCE ONLY to the user on
the correct services and site location of the unit.
The installation and relocation, if necessary, of this product must be carried out by qualified personnel with
up-to-date safety and hygiene knowledge and practical experience, in accordance with current regulations.
IMPORTANT SAFETY INSTRUCTIONS
! Intended Use
The dispenser is for indoor use only. This unit is not a toy. Children should not be supervised not to play with appliance. It should
not be used by children or infirm persons without supervision. This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety. Cleaning and user maintenance
shall not be performed by children without supervision. The min/max ambient operating temperature for the dispenser is 35°F to
75°F (1.67°C to 24°C). Do not operate unit below minimum ambient operation conditions. Should freezing occur, cease operation
of the unit and contact authorized service technician. Service, cleaning and sanitizing should be accomplished only by trained
personnel. Applicable safety precautions must be observed. Instruction warnings on the product being used must be followed.
®
SI-2
"Lancer" is the registered trademark of Lancer © 2017 by Lancer, all rights reserved.
LANCER INSTALLATION/OPERATION MANUAL
BEFORE GETTING STARTED
Each unit is tested under operating conditions and is thoroughly
inspected before shipment. At the time of shipment, the carrier
accepts responsibility for the unit. Upon receiving the unit,
carefully inspect the carton for visible damage. If damage exists,
have the carrier note the damage on the freight bill and file a
claim with carrier. Responsibility for damage to the dispenser lies
with the carrier.
Spartan Ice
LANCER PN: 28-0954/03

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Spartan Ice and is the answer not in the manual?

Questions and answers

Summary of Contents for lancer Spartan Ice

  • Page 1 Spartan Ice LANCER INSTALLATION/OPERATION MANUAL Please refer to the Lancer Corp website (lancercorp.com) for information relating to Lancer Installation/Operation Manuals, Installation Guides, Instruction Sheets, and Technical Bulletins or for your convenience, scan this QR code with a mobile device (app required) for immediate access to other Technical Documents and alternative translations pertaining to this unit.
  • Page 2: Specifications And Features

    5 Carbon Dioxide (CO • WARNING: Carbon Dioxide (CO2) is a colorless, noncombustible gas with a light pungent odor. High percentages of CO displace oxygen in the blood. • WARNING: Prolonged exposure to CO can be harmful. Personnel exposed to high concentrations of CO gas will experience tremors which are followed by a loss of consciousness and suffocation.
  • Page 3: Read This Manual

    READ THIS MANUAL This manual was developed by the Lancer Corporation as a reference for the owner/operator and installer of this dispenser. Please read this guide before installation and operation of this dispenser. If service is required please call your Lancer Service Agent or Lancer Customer Service.
  • Page 4 Activate valve to purge syrup until steady flow is achieved. Install the ice bin drain hose; connect the 90° elbow or Using a Lancer ratio cup, activate the valve and capture a straight fitting underneath the unit’s base. The ice bin drain is sample.
  • Page 5: Cleaning And Sanitizing

    CLEANING & SANITIZING GENERAL INFORMATION Lancer equipment (new or reconditioned) is shipped from the factory cleaned and sanitized in accordance with NSF guidelines. The operator of the equipment must provide continuous maintenance as required by this manual and/or state and local health department guidelines to ensure proper operation and sanitation requirements are maintained.
  • Page 6 Cleaning & Sanitizing Nozzles Cleaning & Sanitizing Syrup Lines Remove nozzle by twisting counter clockwise and pulling Disconnect syrup lines from BIB’s down. Place syrup lines, with BIB connectors, in a bucket of warm water. Activate each valve to fill the lines with warm water and flush out syrup remaining in the lines.
  • Page 7 ILLUSTRATIONS & PART LISTINGS - MAIN UNIT ASSEMBLY Item Part No. Description 30-11833 Metal Lid 05-3240/01 Valve Cover, EcoPour 19-71110 EcoPour Self-Serve Valve, 1.5 oz. 05-3241/01 ID Panel, EcoPour 30-11859 Cup Rest 05-3266 Drip Tray 01-2992 Elbow, 90 Deg., PVC, 1/2” 04-1682 Screw, M4-0.7X4.5, 4.5 Shoulder, FHD, PH, SS...
  • Page 8 Lancer Corp. 800-729-1500 Technical Support/Warranty: 800-729-1550 custserv@lancercorp.com lancercorp.com...

Table of Contents