In-situ RuggedReader Operator's Manual page 26

SECTION 3: USING THE HARDWARE
TIP: To resume
the device from
suspend
at any time, press
Rugged Reader Operator's Manual
Automatic Suspend
By default, the RuggedReader will suspend automatically after three
minutes of inactivity when on battery power.
To adjust the time when the device suspends,
follow these steps:
1. Tap Start > Settings > System tab > Power.
2. Select the Advanced tab.
3. Adjust the device timeout as desired.
4. Tap OK.
26
0055450 rev. 002 10/07