In-situ RuggedReader Quick Start Manual

1a
Slowly unhook and lift up
the bottom latch of the hand
strap. CAUTION: Do not let
the hand strap hook hit the
display.
1d
Insert the battery pack
so that the battery
contacts mate with the
RuggedReader contacts.

Anatomy of the RuggedReader

1 Charge LED (red) 12 USB Host (mini A)
2 Power button 13 9-pin serial port
3 Battery door latch 14 12V DC jack
4 Battery door 15 USB Client (mini B)
5 Hand strap
6 Stylus
7 Main screws (DO NOT REMOVE)
8 Top cap screws (captive)
9 Slot for future accessory
10 Compact Flash (CF) card slot
11 Secure Digital (SD) I/O card slot
TIP: For a complete description of the
device and its functions, please refer to
the RuggedReader operator's manual on
the In-Situ software/resource CD.
1b
Press on the battery
door about ¼" below
the door latch and slide
the latch to the right.
1e
Insert the tabs on the
battery door into the
slots. Make sure the
door latch is all the
way to the right and
properly aligned. Then
close the battery door.
In-Situ Inc.
3
4
5
RuggedReader
1
2
RuggedReader
QUICK START GUIDE

Step One: Install the Battery Pack

1c
Remove the
battery door.
➔
Press
here
1f
Press very firmly on the
➔
battery door and slide the
latch to the left to lock it.
Reattach the hand strap.
(turn over for next steps)
6
7
Press
here
Top view with top
8
cap
6
Top view without
top cap
9 10 11
Communications module
12 13 14 15
®