DEMAG DC-Com 1 Operating Instructions Manual page 115

U02241
Reproduction in whole or in part only with prior consent of Demag Cranes & Components GmbH, 58286 Wetter
Declaration for fitting partly completed machinery
according to Machinery Directive 2006/42/EC, Annex IIB
Hereby we,
Demag Cranes & Components GmbH
Ruhrstraße 28, 58300 Wetter
declare that the electrically driven hoist / hoist with trolley for
lifting loads / lifting and moving loads
Demag DC chain hoist
Demag DC chain hoist with trolley
Serial no.: nnnnnnnn
supplied as partly completed machinery is intended to be incorporated into machinery and its
initial bringing into service is prohibited until the machinery* into which this partly completed
machinery is to be incorporated has been declared in conformity with all relevant provisions of
EC Machinery Directive 2006/42/EC.
(* insofar as this machinery is subject to the scope of application)
Basic requirements of the EC Machinery Directive, insofar as they are relevant for the scope of
delivery, are met by application of the following harmonised standards or C standard drafts:
EN 14492-2
EN 60204-32
The safety objectives of Low Voltage Directive 2006/95/EC are achieved
The product additionally complies with the following relevant directives/provisions:
EC EMC Directive
The special technical documentation according to Annex VII Part B of Directive 2006/42/EC has
been compiled and will be made available to authorised national authorities by the designated
authorised representative in response to a justified request.
Authorised representative for technical documentation
Hans-Jörg Böttcher, Demag Cranes & Components GmbH, 58286 Wetter
Wetter, 11.02.2014
ppa. Dr. Rainer Harkort
Head of Plant Wetter
Material Handling
Original
Cranes - Power driven winches and hoists -
Part 2: Power driven hoists
Safety of machinery - Electrical
equipment of machines - Part 32:
Requirements for hoisting machines
2004/108/EC
ppa. Dirk Schulte
Handling Technology & Drives
Engineering & Development
Subject to change. No liability for errors or omissions
Ident. number / Language
19961244 / EN
Issue Page
0110 1/ 1