7.4.
Data format
The data format is the following :
Header
Timestamp
(*)
(*) : timestamp feature is implemented on D-Fly2 which has for P/N value "B401202xx" ; from firmware v1.54
7.4.1.
Baracoda Header
It is a proprietary data encapsulation. It is necessary to activate the Baracoda header in 2 cases:
to use the Baracoda keyboard emulation (Kemul) and Terminal.
•
to use the "No data loss" mode.
•
You can configure Baracoda Header through BaracodaManager software.
The Baracoda header is enabled in default settings.
7.4.2.
TimeStamp (*)
(*) : timestamp feature is implemented on D-Fly2 which has for P/N value "B401202xx" ; from firmware v1.54
Timestamp can be configured (ON/OFF, synchronise new time) by BaracodaManager and by configuration
barcodes.
Timestamp will be in the following format: YYMMDDhhmmss:
YY: YEAR
MM: MONTH
7.4.3.
Capture Prefix / Suffix
A prefix and/ or suffix can be added to every barcode sent to the host device. You can configure prefix/suffix
through BaracodaManager software or with the Programming Guide.
There is no prefix/suffix in default settings.
7.4.4.
Symbology Prefix / Suffix
A prefix and/or suffix can be added to a specific symbology barcode sent to a host device.
Meaning a certain prefix/suffix will be added while reading a specific symbology.
You can configure prefix/suffix through BaracodaManager software.
There is no "symbology prefix/suffix" in default settings.
Baracoda D-Fly & D-Fly2– User Guide v2.4
Capture
Symbology
Prefix
Prefix
DD: DAY
Barcode
Symbology
Suffix
hh: Hours
mm: Minutes
Data Capture
for Workforce
in Motion
Capture
Suffix
ss: Seconds
- 15 -