Configuring Your Scanner; Reset Your Scanner; Security; Symbology - Baracoda D-Fly User Manual

Configuring your scanner

7.
There are two (2) ways to configure your scanner:
When connected to a host device, the BaracodaManager software can be used for multiple setting
•
changes
The Configuration barcodes In the Programming Guide can be used to configure the scanner without
•
using outside software applications.
7.1.

Reset your scanner

To reset the scanner to its "default settings", use BaracodaManager software or scan the Reset configuration
barcode.
7.2.

Security

The Bluetooth connection is secured with a PIN code authentication.
You can configure security (enable/disable/change PIN code) through BaracodaManager software and through
configuration barcodes.
The Security is enabling by default: default PIN code is 0000.
7.3.

Symbology

You can enable/disable any type of barcode decoders with both the BaracodaManager software or with the
Programming Guide.
Baracoda D-Fly & D-Fly2– User Guide v2.4
Reset
Data Capture
for Workforce
in Motion
- 14 -