Barcode Identifier; Beeps And Leds; Power Management; Low Battery - Baracoda D-Fly User Manual

Data capture for workforce in motion

Hide thumbs Also See for D-Fly:

Table of Contents

7.4.5.

Barcode Identifier

The scanner can transmit a maximum of 3 digit barcode identifier codes for different types of barcodes

(symbologies).

If the option is selected, the barcode identifier is added at the beginning of the barcode frame.

List of identifier codes can be found in the Programming Guide. You can activate barcode identifier through

BaracodaManager software or with the Programming Guide.

The barcode identifier is disabled in default settings.

7.5.

You can enable/disable Beeps / LED Lightening using both the BaracodaManager software or the Programming

Guide.

7.6.

Mutliple parameters exist to optimize the battery autonomy ("Sniff period", "Shutdown timer", etc...)

D-Fly/D-Fly2 works at 10 dBm (Bluetooth Class.2).

The BaracodaManager software can be used for multiple setting changes.

7.7.

An alternation of red and green blinking on the LED indicates that the battery level is low. Recharge battery

immediately. If you continue using the scanner, it will continue working until a triple beep occurs: at that

moment the reader will shut down and you will be forced to charge the scanner.

Baracoda D-Fly & D-Fly2– User Guide v2.4

Data Capture

for Workforce

in Motion

- 16 -

Table of Contents

D-fly2