Data format
Data format
Data format
Data format
The data format is the following: Header + Timestamp + Prefix + Barcode + Suffix
Header
Timestamp
Baracoda Header
Baracoda Header
Baracoda Header
Baracoda Header
It is a proprietary data encapsulation. It is necessary to activate the Baracoda header in 2 cases:
•
to use the Baracoda keyboard emulation (Kemul) and Terminal.
•
to use the "No data loss" mode.
You can configure Baracoda Header through BaracodaManager software.
The Baracoda header is enabled in default settings.
Timestamp
Timestamp
Timestamp
Timestamp
Timestamp can be configured (ON/OFF, synchronise new time) by BaracodaManager and by configuration
barcodes.
Timestamp will be in the following format: YYMMDDhhmmss:
YY: YEAR
MM: MONTH
General Prefix / Suffix
General Prefix / Suffix
General Prefix / Suffix
General Prefix / Suffix
A prefix and/ or suffix can be added to every barcode sent to the host device. You can configure prefix/suffix
through BaracodaManager software or with the Programming Guide.
There is no prefix/suffix in default settings.
Symbology Prefix / Suffix
Symbology Prefix / Suffix
Symbology Prefix / Suffix
Symbology Prefix / Suffix
A prefix and/or suffix can be added to a specific symbology barcode sent to a host device.
Meaning a certain prefix/suffix will be added while reading a specific symbology.
You can configure prefix/suffix through BaracodaManager software.
There is no "symbology prefix/suffix" in default settings.
Baracoda RoadRunners Evolution – User Guide v1.6
General
Symbology
Prefix
Prefix
DD: DAY
Barcode
Symbology
Suffix
hh: Hours
mm: Minutes
Data Capture
for Workforce
in Motion
General
Suffix
ss: Seconds
- 10 -