Stylus; Battery; Switching On The Reader - Baracoda D-Fly User Manual

Stylus

1.
You can use the stylus with your PDA, TabletPC or other types of touch screens. The stylus is retractable and
detachable for security reasons.
Stylus
In case of loss of your stylus, contact you locate reseller.

Battery

2.
Recharge the internal battery by using the included AC adapter. The Adapter rating is 5V, 500mA.
When the scanner is charging, the LED is red (solid).
When the scanner is fully charged, the LED is green (solid).
A full recharge (from completely drained batteries) takes approximately 1 hour.
Make sure that the temperature is from 0°C to 35°C to recharge the battery
When the original batteries wear out, please contact your Baracoda reseller for replacements.

Switching on the reader

3.
Remember to fully charge the battery before first use.
In order to switch on the scanner, please press the trigger button.
The scanner will switch off after some period of inactivity. The default time period is ten (10) minutes of
scanner inactivity if the device is not connected via Bluetooth, and twenty (20) minutes of scanner inactivity if
the device is connected via Bluetooth and if the user don't press the trigger button. These default values can be
modified by the end user.
Baracoda D-Fly & D-Fly2– User Guide v2.4
Data Capture
for Workforce
in Motion
- 5 -