Installation Of Ethernet Card - Omnik Omniksol-2k-TL3-S User Manual

The Ethernet card is shown as below.
A
C
The serial number is shown as below.
8.8

Installation of Ethernet card

Warning: Before installing the Ethernet card to inverter, you must turn off both the AC side
and DC side of inverter to make sure personal safety.
Unscrew the four screws on the interface panel with the screwdriver as shown in Picture
above and keep the screws aside.
68
No.
A
B
B
C
Name
RJ45 connector
14 pin connector
Reset button