Basic Operation; Electronic Control Setup Instructions - Maytag W10376697 Service Manual

eleCTrOniC COnTrOl SeTuP inSTruCTiOnS

DRYER
WHITES PERM.
& COLORS PRESS DELICATES
Dryer control fabric
setting buttons
nOTe: After the washer/dryer has been
installed and plugged in, the display will
show "0 MINUTES" on the washer and dryer
portions of the display. After the washer
and dryer doors have been opened and
closed, the display will show the price for
each machine. On washer/dryers set for free
cycles, the display sections will flash "SELECT
CYCLE."
1. PD Models: Insert coins until "SELECT
CYCLE" flashes on the display portion of
washer or dryer that is to be run.
PR Models: A debit card is required
rather than coins. Generation 1 or 2 debit
card systems may be used; but when
the Generation 2 debit system is used,
the controls will automatically be set to
Enhanced Debit mode (J. Ed). In Enhanced
Debit mode, the card balance will also
display when a debit card is inserted into
the reader.

BaSiC OPeraTiOn

Dryer Display
Washer Display
Display
3-1
2. Door must be closed on the desired washer/
dryer before cycle selection is made.
3. Press the fabric setting button for the
washer/dryer cycle desired. For washer
cycles, also select the desired wash
temperature. After the cycle is started, the
time will display and count down.
4. If a cycle is interrupted by opening the door
or power loss, "RESELECT CYCLE" will
flash in the display. To restart the washer/
dryer, close door and reselect desired cycle.
nOTe: When set for free vend operation an
ongoing dryer cycle will cancel if the door is
opened.
WHITES COLORS BRIGHTS
PERM. DELICATES QUICK
PRESS AND KNITS CYCLE
WASHER
Washer control fabric
setting buttons