Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1.
Remove dryer blower housing
(See page 4-72).
2.
Slide exhaust duct out the front of the dryer.
nOTe: If blower housing and drum have
yet to be removed, remove the short 1/4"
hex head screw that secures exhaust duct
to blower housing. Pull exhaust duct out the
rear of the dryer.
reMOve Dryer exHauST DuCT
Exhaust Duct
1/4" Screw
TeCH TiP: When reinstalling exhaust duct,
or for new dryer installations, make sure
the anti-vibration ring for the exhaust duct
is installed in the hole in the back panel
of dryer. This ring cannot be installed or
removed with the exhaust duct in place.
Ring Viewed
From Inside
Dryer
4-73