Step 1: Connect To A Network - Sirius XM RAdio TTR1 User Manual

Close the browser window to exit the player before continuing .
The SiriusXM TTR1 Radio supports a wireless Internet connection through any
standard 802 . 1 1b/g access point . This includes wireless networks which are
WEP/WPA/WPA2 protected and require a password, and wireless networks
where the network name (SSID) is hidden . Once you have connected to a
wireless network, the Radio will remember your network settings so you will
not have to enter the information again, unless you perform a reset of the
Radio to the factory defaults .

Step 1: Connect to a Network

The Network Wizard feature is the easiest way to connect to a wireless
network . It searches for available wireless networks and displays a list of
wireless networks found for you to select . However, if your wireless network
name (SSID) is hidden, or if your network is DHCP disabled, you'll have to
manually enter the network settings rather than using the Network Wizard .
Decide whether you will be using a wireless network connection, or a wired
network connection, and whether you can use the Network Wizard or if you'll
need to manually configure your network settings . Complete the instructions
in the appropriate section:
Connect to a WIRELESS network using the NETWORK WIZARD (page 18) .
Connect to a WIRED network using the NETWORK WIZARD (page 21) .
Connect to a WIRELESS network using MANUAL settings (page 66) .
Connect to a WIRED network using MANUAL settings (page 71) .
17