Connect To Wired Network (Network Wizard) - Sirius XM RAdio TTR1 User Manual

To connect to a wired network using the Network Wizard:
a.
At the rear of the Radio, remove the compartment cover and
connect an Ethernet cable to the Ethernet connector on the inside
left of the compartment . Refer to "Wired Ethernet Connector"
on page 11 for the location of the Ethernet connector . Replace the
compartment cover .
b.
Connect the other end of the Ethernet cable to your home's wired
network .
c.
If you have turned your SiriusXM TTR1 Radio on for the first time, the
SSID screen will already be displayed . Skip ahead to step g .
d.
Press MENU and turn the TUNE knob to highlight System Setup .
Press the TUNE Knob .
e.
Turn the TUNE knob to highlight
Network . Press the TUNE Knob .
f.
Press the TUNE Knob to select
Network Wizard .
g.
The Radio will scan for networks .
When the scan is complete, turn the
TUNE knob to highlight [Wired] and
press the TUNE knob .
h.
If the Radio is able to connect to your
network, the Connected screen will
be displayed . If Waiting for Ethernet
SSID
[Wired]
Some_Network_Name
Other_Network_Name
[Rescan]
[Manual config]
Connected
Connected
21