Sirius XM RAdio TTR1 User Manual page 18

Installation
To connect to a wireless network using the Network Wizard
If the wireless network is secured, you'll need to enter the key (password) for
the wireless network during the connection procedure . If you don't know the
password, contact your network administrator of the person who setup the
wireless network .
a.
If you have just turned your SiriusXM TTR1 Radio on for the first time,
the SSID screen will already be displayed . Skip ahead to step e .
b.
Press MENU and turn the TUNE knob to highlight System Setup . Press
the TUNE Knob .
c.
Turn the TUNE knob to highlight Network . Press the TUNE Knob .
d.
Press the TUNE Knob to select Network Wizard .
e.
The Radio will scan for wireless networks
and return with a list of wireless networks
which were found . (A sample screen is
shown here . Your actual wireless network
name will appear in the list, if found .) Turn
the TUNE knob to highlight your wireless
network and press the TUNE knob . If you
don't know the network name, contact
your network administrator of the person
who set up the wireless network .
f.
If you choose an unsecured network, and
the Radio is able to connect to the wireless
network, the Connected screen will be
18
SSID
[Wired]
Your_Network_Name
Other_Network_Name
[Rescan]
[Manual config]
Connected
Connected