Table of Contents
Advertisement
To activate the no-wake mode:
(1) Release the throttle lever and let the en-
gine speed return to idle.
(2) Make sure that the shift lever is in the for-
ward position. The no-wake mode cannot
be activated when the shift lever is in the
reverse or neutral position.
1
1 Shift lever
2 Forward position
(3) Push and hold the "NO-WAKE MODE"
switch. Once the beeper sounds three
times quickly and "8" (when kilometers
are selected) or "5" (when miles are se-
lected) starts blinking in the digital speed-
ometer display, the no-wake mode is
activated. Keep the throttle lever in the
fully closed (idle) position when the no-
wake mode is activated.
TIP:
The digital speedometer display blinks contin-
ually while the no-wake mode is activated.
2
To deactivate the no-wake mode:
Perform one of the following operations. The
beeper sounds two times quickly and the dig-
ital speedometer display stops blinking when
the no-wake mode is deactivated.
●
●
TIP:
The no-wake mode is also deactivated when
the engine is stopped.
EJU37025
Cruise assist
The cruise assist is a function for maintaining
a desired engine speed within a fixed range
while operating the watercraft.
Watercraft operation
1 "NO-WAKE MODE" switch
Push the "NO-WAKE MODE" switch.
Squeeze the throttle lever.
1
37
Advertisement
Table of Contents
