Table of Contents
Advertisement
Instrument operation
TIP:
Miles are selected as the display units at the
Yamaha factory.
1 Digital speedometer
Digital speedometer display (mph)
The "SPEED" indicator light blinks three times
if miles are selected as the display units when
the multifunction information center is activat-
ed.
TIP:
If the analog speedometer is selected, the
"SPEED" indicator light blinks three times,
then comes on.
Digital speedometer display (km/h)
The "SPEED" indicator light blinks once if kilo-
meters are selected as the display units when
the multifunction information center is activat-
ed.
TIP:
If the analog speedometer is selected, the
"SPEED" indicator light blinks once, then
comes on.
To switch the digital speedometer display
units:
Push the "VOLT/HOUR" button for at least 1
second, within 10 seconds after the multifunc-
tion information center is activated. The digital
speedometer display changes. When the dis-
play units are switched from kilometers to
42
miles only, the "SPEED" indicator light blinks
three times.
1
1
1 "VOLT/HOUR" button
2 "SPEED" indicator light
TIP:
FX Cruiser SHO: The display units can also
be switched by pushing the "START/STOP"
button and "MODE/RESET" button simulta-
neously for at least 8 seconds.
1 "START/STOP" button
2 "MODE/RESET" button
EJU42260
Hour meter/voltmeter
The hour meter/voltmeter has both an hour
meter function and a voltmeter function. By
switching the meter, it can be used as either
an hour meter or a voltmeter.
2
1
2
Advertisement
Table of Contents
