Table of Contents
Advertisement
curely locks in place. (See page 33 for
Q.S.T.S. operation procedures.)
EJU42420
Shift system checks
EWJ00031
WARNING
Do not touch the reverse gate while the
shift lever is being operated, otherwise
you could be pinched.
Operate the shift lever several times to make
sure that operation is smooth throughout the
whole range. Also, make sure that the reverse
Pre-operation checks
gate moves up and down according to the op-
eration of the shift lever and that the gate
makes contact with the stoppers. (See page
32 for shift system operation.)
1
1 Stopper
EJU42180
Throttle lever checks
Operate the throttle lever several times to
make sure that operation is smooth through-
out the whole range. Also, make sure that the
throttle lever returns automatically to its fully
closed (idle) position when released.
71
Advertisement
Table of Contents
