Table of Contents
Advertisement
Instrument operation
Water temperature
This display shows the ambient water temper-
ature "L TEMP" (lake temperature).
Air temperature
This display shows the ambient air tempera-
ture "E TEMP" (environmental temperature).
Average speed/Tripmeter/Trip timer
modes
Average speed, distance traveled, and trip
time are recorded once the "START/STOP"
button is pushed to start the measurements,
regardless of the current display.
TIP:
The measurements are performed only while
the engine is running.
The measurements are not saved if the en-
gine is stopped. The measurements are reset
48
automatically when the displays go off 25 sec-
onds after the engine stops.
1 "START/STOP" button
2 "MODE/RESET" button
To start the measurements:
Push the "START/STOP" button for less than
1 second. The beeper sounds once and the
measurements start.
To stop the measurements:
Push the "START/STOP" button for less than
1 second while the measurements are being
recorded. The beeper sounds once and the
measurements stop.
To restart the measurements:
Push the "START/STOP" button for less than
1 second while the measurements are
stopped. The beeper sounds once and the
measurements restart.
To reset the measurements:
Push the "MODE/RESET" button for at least 2
seconds
while
the
stopped. The beeper sounds twice and the
measurements are reset.
1
2
measurements
are
Advertisement
Table of Contents
