Cruise Assist - Yamaha FX HO 2019 Owner's/Operator's Manual

and the acceleration setting under "Ac-
cel."
1
Speed
45 MPH
35 MPH
55 MPH
1 Maximum watercraft speed setting
2 Acceleration setting
(4) Tap the "Save" button to complete the
settings and return to the previous dis-
play.
To lock the drive control mode screen:
(1) Release the throttle lever and let the en-
gine speed return to idle.
(2) Tap the drive control mode indicator on
the multifunction information center.
(3) Tap the "Lock" button.
(4) The PIN entry screen will be displayed.
Flick up or down to set each digit of the
4-digit PIN, and then tap the "Enter" but-
ton.
(5) Tap the "ON" button.
Drive Control Lock
ON
(6) Tap the "Save" button to complete the
setting and return to the "Drive Control"
screen.
2
Accel.
Slow
Normal
Slow
Save
OFF
Save
Watercraft operation
To unlock the drive control mode screen:
(1) Release the throttle lever and let the en-
gine speed return to idle.
(2) Tap the drive control mode indicator on
the multifunction information center.
(3) The PIN entry screen will be displayed.
Flick up or down to set each digit of the
4-digit PIN, and then tap the "Enter" but-
ton.
(4) Tap the "Lock" button.
(5) Tap the "OFF" button.
(6) Tap the "Save" button to complete the
setting and return to the "Drive Control"
screen.
EJU45021

Cruise assist

The cruise assist is a function for maintaining
a desired engine speed within a fixed range
while operating the watercraft. Once the
cruise assist is activated, the set engine
speed can be increased or decreased. How-
ever, the adjustment is limited to a maximum
of five increments above or below the initial
cruise assist setting.
TIP:
The cruise assist can only be set between en-
gine speeds of approximately 3000 r/min and
approximately 7000 r/min.
37