Table of Contents
Advertisement
Control function operation
in response to handlebar input until you apply
throttle again or you reach trolling speed.
EJU31293
Adjustable tilt steering system
The position of the handlebars can be adjust-
ed back and forth by operating the tilt lever.
To adjust the handlebar position:
(1) Pull the tilt lever up to disengage the han-
dlebar lock, and then move the handle-
bars back or forth to the desired position.
WARNING! Never pull the tilt lever dur-
ing operation, otherwise the handle-
bars may suddenly change position,
which may lead to an accident.
1 Tilt lever
30
(2) Make sure that the tilt lever returns to its
original position and that the handlebars
are securely locked in place.
[EWJ00041]
EJU41800
Cooling water pilot outlets
When the engine is running, some of the cool-
ing water that is circulated in the engine is dis-
charged from the cooling water pilot outlets.
1
1
1 Cooling water pilot outlet (port [left] side)
There are cooling water pilot outlets on the
port (left) and starboard (right) sides of the
watercraft. To check for proper operation of
the cooling system, make sure that water is
being discharged from the port (left) pilot out-
let. If water is not being discharged from the
outlet, stop the engine and check the jet in-
take for clogging. (See page 102 for informa-
tion on the jet intake.)
TIP:
It will take about 60 seconds for the water to
●
reach the outlets after the engine is started.
Advertisement
Table of Contents
