Table of Contents
Advertisement
Instrument operation
When "mph" are selected as the display units
of the digital speedometer, values are shown
in miles/gallons/degrees Fahrenheit.
1 Multifunction display
1 "MODE/RESET" button
To switch the display mode, push the
"MODE/RESET" button for less than 1 sec-
ond. The display mode changes in the follow-
ing order.
Compass
This display shows the current direction of the
watercraft using the 8 major compass points.
TIP:
The current heading of the watercraft can
●
be shown in degrees together with the com-
pass points.
The accuracy of the compass and heading
●
varies depending on the operating condi-
tions. Use this function as a reference only.
46
To display the heading:
(1) While pushing the "START/STOP" but-
ton, start the engine.
(2) Release the "START/STOP" button brief-
1
ly, and then push the "START/STOP"
button again for 2 seconds or more.
TIP:
Push the "START/STOP" button within 10
seconds after the multifunction information
center is activated.
1
Average speed
This display shows the average speed in kilo-
meters per hour "AV KMH" or miles per hour
"AV MPH" since the measurement was start-
ed.
Advertisement
Table of Contents
