Table of Contents
Advertisement
Watercraft operation
Number of
Low RPM Mode
beeps
Deactivated
TIP:
If the remote control transmitter is operated
while the multifunction information center is in
the standby state, the center performs the ini-
tial operation, and then the setting is selected.
To activate the Low RPM Mode:
Push the "L-Mode" (unlock) button on the re-
mote control transmitter for more than 4 sec-
onds. Once the beeper sounds three times
and the "UNLOCK" indicator light blinks three
times, then comes on, the "L-MODE" indicator
light comes on and the Low RPM Mode is ac-
tivated.
TIP:
If the Low RPM Mode is activated immediate-
ly after the information display turns off, the
"L-MODE" indicator light will not come on. The
"L-MODE" indicator light will come on when
the engine is started.
1
L-Mode
1 "L-Mode" (unlock) button
2 "L-MODE" indicator light
To deactivate the Low RPM Mode:
Push the "L-Mode" (unlock) button on the re-
mote control transmitter for more than 4 sec-
36
"L-
MODE"
operation
indicator
light
Comes
Activated
on
Goes off
2
onds. Once the beeper sounds two times and
the "UNLOCK" indicator light blinks two times,
then comes on, the "L-MODE" indicator light
goes off and the Low RPM Mode is deactivat-
ed. When the Low RPM Mode is deactivated,
the watercraft returns to the normal operation
mode.
EJU42480
No-wake mode
The no-wake mode is a function that main-
tains the engine speed at a fixed setting for
operating the watercraft at low speeds. This
function can be used only for forward opera-
tion of the watercraft.
TIP:
The no-wake mode can only be activated af-
ter 5 seconds have elapsed since starting the
engine.
Activating and deactivating the no-wake
mode
Activation of the no-wake mode will be con-
firmed by the number of beeps when the "NO-
WAKE MODE" switch is pushed, and by the
digital speedometer display of the multifunc-
tion information center. (See page 40 for infor-
mation on the multifunction information
center.)
Number
No-wake mode oper-
of beeps
Activated
Deactivated
TIP:
The beeps and the blinking digital speedome-
ter display also indicate the activation of the
cruise assist. (See page 37 for information on
the cruise assist.)
Digital
speedome-
ation
ter display
Starts
blinking
Stops
blinking
Advertisement
Table of Contents
