Pre-Operation Check Points; Pre-Launch Checks; Steering System Checks; Remote Control Lever Checks - Yamaha 190 FSH Sport 2017 Owner's/Operator's Manual

Pre-operation check points

Pre-launch checks

Perform the pre-launch checks in the pre-op-
eration checklist while the boat is on land.

Steering system checks

Make sure the steering wheel is not loose.
There should not be any free play, either in-
and-out or in rotation. Turn the steering wheel
fully to the right and left to make sure opera-
tion is smooth and unrestricted throughout the
whole range.
Make sure the jet thrust nozzle changes direc-
tions as the steering wheel is turned. The jet
thrust nozzle should point to starboard (right)
when the wheel is turned to the right. The jet
thrust nozzle should point to port (left) when
the wheel is turned to the left. There should
not be free play between the steering wheel
and the jet thrust nozzle. In addition, check
that the direction of the articulating keel
changes according to the movement of the jet
thrust nozzle.
Pre-operation checks
1 Jet thrust nozzle
2 Articulating keel

Remote control lever checks

WARNING
Do not touch the shift gate while the re-
mote control lever is being operated, oth-
erwise, you could be pinched.
Operate the remote control lever several
times to make sure that operation is smooth
throughout the whole range.
2
F
5
3
7
6
8
1 Neutral position
2 TDE position
3 Forward position
4 Reverse position
5 Shift
6 Fully closed
7 Throttle
8 Fully open
1
2
N
1
R
5
4
7
6
8
81