Re-Circulating Requirements; Schematic Of Classical Island Components - Sirius Range Hoods SIU401-22 Installation Instructions Manual

Contemporary island range hoods
Table of Contents

Advertisement

Fit the screen – have someone hold
this in place whilst another person
puts in the screws. Using FINGERS
ONLY tighten the screws evenly
until finger tight. Do not under
any
circumstances use a screw
driver.

Re-Circulating Requirements

Fit the carbon filter after the installa-
tion is complete – these fit in behind
the aluminum grease filter.
SCHEMATIC OF MODULAR ISLAND COMPONENTS
5
A short length of ductwork must be
connected from the exhaust outlet up
to the deflector (must be purchased
with hood).
The deflector connects to the top of
Bracket "A" and forces the air out
through the grills on the side of the
chimney section back into the room.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Siu401-23

Table of Contents