Data-Based Model; 85059B (Precision) Kit Contents; The 85059B (Precision) Calibration Kit Contains The Following - Keysight Technologies 85059B Operating And Service Manual

General Information
Calibration Kit Overview

Data-Based Model

The data-based model (85059B) of each calibration kit provides higher
accuracy for describing calibration standards than a polynomial model. The
data-based nominal S-Parameter model for each calibration standard is
generated by using a theoretical derivation or a high accuracy S-Parameter
measurement. These nominal S-parameter models are stored as part of the
data-based model. Errors that can be the result of polynomial model
approximations do not exist.
The data-based models may only be used with the SmartCal (Guided)
Calibration method of the Cal Wizard. Using the data-based models with the
Unguided Calibration method of the Cal Wizard is not allowed.
The data-based models may NOT be edited with the Advanced Modify Cal Kit
dialog box. Attempts to programmatically edit the definitions of the
data-based-model calibration standards will result in reported errors (i.e. SCPI
Execution Error).
1
In the PNA's Modify Calibration Class Assignments dialog box , the "Expanded
Math" feature is turned ON by default when the 85059B data-based model is
selected from a cal kit menu. In order to achieve a more accurate calibration,
Expanded Math uses the data at any given frequency from ALL measured
standards instead of using only the three standards specified in the class
definitions.

85059B (Precision) Kit Contents

The 85059B (Precision) calibration kit contains the following:

— one pair (male and female) of an offset open
— one pair (male and female) of a lowband load
— four pairs (male and female) of offset shorts
— three adapters
— form—tracking recalibration date due
— calibration certificate
— wrench, open end for the 6 mm flats on some of the components
— wrench–torque, 4-in-lb. 6 mm open end, gold handle
— wrench–torque, 4-in-lb. 14 mm open end, gold handle
— a 10x magnifying glass
— case—plastic storage
1. Pathway to the Modify Calibration Class Assignments dialog box: Calibration >
Advanced Modify Cal Kit > Edit Kit > Class Assignments: Edit.
1-4 Keysight 85059B Operation and Service Guide