Keysight 1.0 mm Precision Calibration Kit
85059B
Operation and Service Guide
3
Use, Maintenance, and Care of the Devices
Information in this Chapter
Chapter Three at-a-Glance
Section Title
"Electrostatic Discharge" on page 2
"Visual Inspection" on page 4
"Cleaning Connectors" on page 8
"Pin Depth" on page 10
"Making Connections" on page 12
"Using a Torque Wrench" on
page 15
"Disconnection Procedure" on
page 19
"Handling and Storage" on page 19
Summary of Content
How to protect your instruments and devices against electrostatic
discharge.
A discussion of visually inspecting your verification kit's contents.
How to clean your connectors.
How to verify the pin depth of you male and female devices.
Discussion of making connections. Includes a discussion of proper
torquing procedures and properly separate connections.
How to use a torque wrench for consistent measurements and
avoiding damaging a device.
Discussion of how to disconnect your devices and how to avoid
damaging your devices while torquing.
What the system verification does.
How to perform the verification test.
How to interpret the results.
1