Instrument Program - Dentsply Sirona SINIUS Brief Operating Instructions

Instrument program

12
Dentsply Sirona
SPRAYVIT instrument light
Activates the instrument light on the
SPRAYVIT when it is removed from the
holder
Active lumbar function
Adjustment of active lumbar support
In the Standard Start program operating
mode, the instrument settings can be made
with static quick setting keys, program-
mable quick setting keys, or function levels.
Static quick setting keys
The values shown on the quick setting keys
can be selected by touching them briefly
(< 1 s).
Speed quick setting keys
For setting specified speeds or increments
BL, BL ISO C, and BL Implant motors:
min. 90 rpm, max. 40,000 rpm
BL ISO E motor:
min. 2000 rpm, max. 40,000 rpm
Intensity quick setting keys
For setting preset or intermediate intensity
values ranging from 1% to 100%
Setting speed and intermediate inten-
sity values with quick setting keys
 Increase intensity: Press and hold (>1 s)
a quick setting key whose intensity
value is greater than or equal to the
value displayed in the first line.
 Reduce intensity: Press and hold (>1 s) a
quick setting key whose intensity value
is less than the value displayed in the
first line.
Memory key (SaveMode)
After an instrument is deposited in its
holder, the settings made in the instrument
program are saved only if the
is first pressed and held >2 sec.
Memory key