Repacking Controller-Pc - Eshed Robotec Controller-PC User Manual

SCORPOWER Control Box 110/220VAC
PC Servo Control Card
Teach Pendant (Optional):
Teach Pendant
Mounting fixture;
Teach Pendant for Controller-PC User's Manual
Emergency By-Pass Plug (required when TP not connected)
Cables:
Power Cord 110/220 VAC
SCORPOWER Box Cable-Computer connector cable (D-62-pin, high density)
SCORBASE for Windows software diskettes.
Documentation:
Controller-PC User's Manual
SCORBASE for Windows Reference Guide

Repacking Controller-PC

Save the packing materials and shipping carton. You may need them later for shipment
or for storage of the Controller-PC.
The servo control card and the power box should be repacked in their original packaging
for transport.
If the power box's original carton is not available, wrap the power box in plastic or heavy
paper. Put the wrapped power box in a strong cardboard carton at least 15cm (about
6 inches) longer in all three dimensions than the power box. Fill the carton equally
around the unit with resilient packing material (shredded paper, bubble pack, expanded
foam chunks).
Seal the carton securely with strapping or packing tape. Do not use cellophane or
masking tape.
Controller-PC
Controller-PC Package
2 User's Manual
9709