Eshed Robotec Controller-PC User Manual page 36

3. From the SCORBASE program group, select Setup PC Controller.
The Controller Card Setup window will be displayed on your screen, as shown in
Figure 16.
• From the Address drop-down list, select an available I/O address.
AND/OR
• From the IRQ drop-down list, select an available IRQ.
Once you make your selections, the proper jumper settings will be displayed on the
screen.
4. Take the PC Controller card in hand. Set the jumpers on the card in accordance with the
jumper settings displayed in the Controller Card Setup window.
Click on the Save button. These settings will now become the default settings.
5. Exit the software and turn off the PC.
Install the PC Controller card in the PC.
6. Turn on the PC. Restart Windows 95.
7. Select
Setup PC Controller
Controller-PC
. From the Controller Card Setup window, click the Test button.
Figure 16: Controller Card Setup
30 User's Manual
9709