Pc Servo Card Installation; Pc Requirements - Eshed Robotec Controller-PC User Manual

1 Power On/Off Switch
2 Power Line 110/220VAC socket
3 Line Voltage Indicator
4 AC Power Fuse Drawer
5 TEACH PENDANT 6 pin telephone jack
6 Remote EMERGENCY Switch 2 pin WAGO connector
7 COMPUTER 62-pin D-type high density connector
8 ROBOT D50 connector
9 Axes 7 and 8 Driver D9 connectors
10 Digital Input / Output screw terminals
11 Analog Input / Output screw terminals
12 Emergency Button and LED indicator
13 Input / Output LED indicators
14 Power LED indicator
15 Motors LED indicator

PC Servo Card Installation

PC Requirements

The PC which will be used in conjunction with Controller-PC must meet the following
requirements:
• CPU : 80486 or higher, with one free 8-bit or 16-bit AT ISA slot
• RAM : minimum 8 MB
•
Hard disk space: minimum 10 MB
• Windows 3.11 (Windows for Workgroups) or Windows 95
The SCORBASE software for Controller-PC may not run properly under
Windows 3.1.
Controller-PC
Legend
Back Panel
Front Panel
8 User's Manual
9709