•
Conveyor Belt (gray), 24V ______________ Catalog #1010
•
Linear Table 0.3m, 24V ________________ Catalog #1013
•
XY-Table, 24V _______________________ Catalog #1014
•
Rotary Table, 12V_____________________ Catalog #1005
•
Rotary Table, 24V_____________________ Catalog #1009
•
Motor Kit (1:127), 12V_________________ Catalog #1206
•
Motor Kit (1:65.5), 12V ________________ Catalog #1211
•
Motor Kit (1:19.5), 12V ________________ Catalog #1212
EMERGENCY Button and LED
When the red EMERGENCY button on the front panel of the SCORPOWER box is
pressed, the following occurs:
•
Motor power is disconnected; all motor movement stops; the green MOTORS LED
shuts off.
•
The COFF state is activated.
•
The red emergency LED lights up.
•
An emergency message appears.
•
All running programs are aborted.
•
The inputs and outputs are " frozen" in their current state.
•
The SCORBASE commands HOME and CON cannot be activated.
Release the EMERGENCY button by pulling it out, as indicated by the button.
When the EMERGENCY button is released, the following occurs:
•
The red emergency LED shuts off.
•
A message appears, prompting you to activate CON or to remain in COFF state.
To resume normal operation, do the following:
•
Activate CON. The green MOTORS LED turns on.
•
Reactivate user programs. (All positions, including Home, remain in memory.)
Remote Emergency Switch
When a remote emergency switch is connected to the controller, it functions exactly like
the EMERGENCY button.
To connect a remote emergency switch, refer to the instructions in the preceding chapter.
Controller-PC
14
User's Manual
9709